STRONG 2S
The powerful one

Oil-injected screw compressors with direct drive 22-315 kW

The two-stage compaction reduces the temperature increase
during the compaction process and therefore requires less energy input. Significant savings can be achieved over the life cycle of a compressor station. The compressor speed control ensures that only as much air is produced as is actually required. All permanent magnet motors are equipped with efficiency class IE5 as standard.

TO THE MODEL OVERVIEW
Your advantages with the STRONG 2S compressor

Two-stage compaction

Exceptionally high energy savings compared to single-stage compression. Due to the intermediate cooling of the air in the compression process, less energy is required. In some cases, more than 10% energy can be saved compared to single-stage compaction

Permanent magnet motor

PM motors are characterized by improved efficiency compared to asynchronous motors. Our PM motors achieve or exceed class IE5. Our motors are air-cooled. There is no additional oil circuit for engine cooling and therefore less oil is required in the system

Speed control

The motor speed is automatically adjusted to the air requirement. This enables high energy savings and reduces expensive idle times to a minimum

Intelligent control

SCC control units already have many options on delivery. For example, the connection of the control system via the ModBus protocol is already available, as is the option of connecting and controlling up to 10 compressors with each other

Maximum reliability

Slow-rotating compressor stages, below 3,500 rpm, and a generously dimensioned ventilation system significantly increase the service life of the compressors

Accessibility for maintenance work

When developing new compressors, we place particular emphasis on the accessibility of compressor components for maintenance work. This reduces the time required for maintenance work and makes it easier for service technicians

Energy recovery

With the heat recovery option, you can make your compressor even more efficient with integrated heat exchangers and save additional costs by using the heat directly in the form of hot water

Low noise level

The low speed of the compressor stage and adapted air routing have a positive effect on noise emissions

5 Jahre Garantie

(Details auf Anfrage)
The champion in energy efficiency

Our STRONG 2S series is the champion among energy-efficient compressors.

The use of highly efficient permanent magnet motors can save up to 10% more energy in a compressor (compared to a speed-controlled compressor with a three-phase asynchronous motor).

SCREW COMPRESSOR SMART

Model Overview

ModellNominal-Leistung
kW		Volumenstrom
(m³/min)@8bar		Volumenstrom
(m³/min)@10bar		Länge in mmBreite in mmHöhe in mmGewicht in kgGeräusch
dB (A)
STRONG 2S 22221,43 - 3,981,21 - 3,671.6201.1001.45086578 +/-3
STRONG 2S 30302,21 - 5,891,41- 4,701.8661.2661.6041.08078 +/-3
STRONG 2S 37372,56 - 6,822,25 - 5,881.8661.2661.5741.15078 +/-3
STRONG 2S 45453,37 - 8,912,53 - 7,532.0401.5302.1751.80078 +/-3
STRONG 2S 55554,03 - 10,673,37 - 9,572.0401.5302.1752.00078 +/-3
STRONG 2S 75755,69 - 15,154,53 - 12,052.1661.8102.1772.10078 +/-3
STRONG 2S 90906,68 - 18,525,35 - 14,862.6501.8502.1302.75082 +/-3
STRONG 2S 1101108,13 - 22,596,80 - 18,892.3362.0402.2052.82082 +/-3
STRONG 2S 1321329,90 - 26,398,90 - 23,692.7202.2002.2003.57082 +/-3
STRONG 2S 16016011,90 - 31,8010,0 - 26,72.7202.2002.2003.57082 +/-3
STRONG 2S 20020013,55 - 37,6612,18 - 33,943.5662.1662.3705.75082 +/-3
STRONG 2S 25025016,90 - 42,4013,56 - 37,663.5662.1662.3706.00084 +/-3
STRONG 2S 315 WK31519,5 - 54,417,8 - 49,43.5802.1002.5687.33084 +/-3

Performance data in accordance with ISO 1217, Annexe C
Technical changes and errors excepted

Wir informieren Sie!

SCC Newsletter

Aktuelle News und neue Produkte erhalten Sie zuerst.
Jetzt anmelden
KONTAKTIEREN SIE UNS

Sie haben Fragen?

Zögern Sie nicht uns bei allen Fragen zu kontaktieren.
KONTAKTIEREN SIE UNS

SCHICKEN SIE UNS EINE NACHRICHT

Kontaktformular / DE

Zögern Sie nicht uns Ihre Anfrage mitzuteilen und verwenden Sie unser Kontaktformular. Wir freuen uns darauf Ihnen weiterhelfen zu dürfen.

Ihr Name(Required)
Haben Sie eine Frage an uns? Wir beantworten sie gerne und melden uns so schnell wie möglich bei Ihnen.
Einwilligung(Required)
This field is for validation purposes and should be left unchanged.

KONTAKT

Tolpec GmbH
SCC air compressors
Wertstraße 44
73240 Wendlingen
Deutschland

+49 7024 4088-0

contact@scc-aircompressors.com

Rufen Sie uns an, schreiben Sie uns eine E-Mail oder nutzen Sie das Kontaktformular. Wir werden uns umgehend bei Ihnen melden und freuen uns auf Ihre Nachricht.